Wastewater Treatment | Tertiary Treatment & Reuse
Tertiary treatment may be required for effluent polishing prior to discharge or for water reuse.
  To determine an optimal solution for tertiary equipment, consider the following factors: footprint, plant hydraulics, plant availability, desired effluent quality, operational costs and plant flow and loading.
Product Description Manufacturer
Actiflo An ultra high-rate clarification process which combines microsand enhanced flocculation and lamellar settling. Krüger
Hydrotech Discfilter A microscreen used for solids removal and product recovery. The disc design is particularly advantageous when a large filter area is needed. Krüger
AWI Phoenix stainless steel underdrain system. The AWI Phoenix stainless steel underdrain system is the lowest profile, most reliable, most efficient, least overall capital cost underdrain system available. AWI
DynaSand Filter A low-cost alternative to microfiltration technology while producing comparable or superior filtrate quality. Parkson
Gravisand® Filtration System for Wastewater Effluent Polishing Gravisand technology incorporates the principles and advantages of conventional traveling bridge designs but uses improved methods of accomplishing and maintaining filtration and regeneration. Evoqua/Davco
Envirex MemPulse Membrane Bioreactor (MBR) Systems

These integrated MBR process solutions encompass a hybrid group of industry-leading technologies combined to meet the individual requirements of each application. Evoqua/Memcor
Memcor Membrane Systems Pressurize and submerged, pre-engineered membrane system. Its modular "building block" configuration simplifies design, reduces installation and makes operation easy. Evoqua/Memcor
Hydro-Clear Filter Pulsed Bed filter that can handle wide load fluctuations. Evoqua/Hydro-Clear

Home | About Us | Products | Parts Request | Line Cards | Solutions
Contact Us
| Request Info | Testimonials | Site Map

© 2018 by Wm. H. Reilly & Co. All Rights Reserved.